Mercedes-Benz 2003 CL 55 AMG Manuel de l'opérateur télécharger pdf (Page 311)

311

Practical hints

Flat tire

Removing the wheel

1 Alignment bolt

왘 Unscrew upper-most wheel bolt and re-

move.

왘 Replace this wheel bolt with alignment

bolt 1 supplied in the tool kit.

왘 Remove the remaining bolts.

왘 Remove the wheel.

Mounting the new wheel

왘 Clean contact surfaces of wheel and

wheel hub.

왘 Guide the spare wheel onto the align-

ment bolt and push it on.

왘 Insert wheel bolts and tighten them

slightly.

왘 Unscrew the alignment bolt, install last

wheel bolt and tighten slightly.

!

Do not place wheel bolts in sand or dirt.

This could result in damage to the bolt

and wheel hub threads.

!

To avoid paint damage, place wheel flat

against hub and hold it there while in-

stalling first wheel bolt.

Warning! G

Always replace wheel bolts that are dam-

aged or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be re-

paired immediately. Do not continue to drive

under these circumstances! Contact an au-

thorized Mercedes-Benz Center or call

Roadside Assistance.

Incorrect mounting bolts or improperly

tightened mounting bolts can cause the

wheel to come off. This could cause an acci-

dent. Make sure you are using the correct

mounting bolts.

Warning! G

Use only genuine equipment

Mercedes-Benz wheel bolts. They are identi-

fied by the Mercedes star. Other wheel bolts

may come loose.

Do not tighten the wheel bolts when the ve-

hicle is raised. Otherwise the vehicle could

tip over.

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 383 384

Commentaires sur ces manuels

Pas de commentaire